Spreading and feathering the finishing coat over a plasterboard patch

ServicesPlasterboard & wall repairs

Make the hole, crack or stain disappear, not just get covered.

You text me a photo of the damage and I do the repair myself, set, sanded and ready to paint. One fixed price, and the patch is meant to vanish, not to show up the first sunny afternoon.

Free, fixed-price, no obligation.

5.0
from 86 Google reviews
100+
properties looked after
Kingscliff
to Coomera

A bad patch shows itself the moment the light goes low.

There's a doorknob hole behind a door, or a dent from moving a couch. A crack that keeps creeping back at the cornice no matter how many times it gets filled. A brown ring on the ceiling from a leak that's long since fixed.

Someone has a go with a tube of filler. It looks fine the day they do it. Then the afternoon sun rakes across the wall and there's the patch, a flat bump where the wall used to be smooth.

The reason is simple, and it's why I don't rush this. Get that right and you genuinely can't find where it was.

Here’s what you actually get

  • Holes patched, from a doorknob dent through to cutting in and re-sheeting a whole section
  • Cracks repaired, with a read on whether it's a straight re-set or movement that'll keep coming back
  • Water-stained and sagging ceilings cut out, re-sheeted and set flat
  • Full sheet replacement on walls and ceilings
  • The right board for the spot: water-resistant in wet areas and ceilings, fire-rated where the spec calls for it
  • Set, sanded and primed to a paint-ready finish, joins feathered so they don't telegraph
Paul responded promptly and fixed some potentially big issues around the house with a minimum of fuss. Thanks Paul. You're on speed-dial for next time!
David Hobley · 5.0 Google review

Before & after

The same wall sheeted, set flush and repainted with no trace of the cutout
Wall with a square access cutout sawn through the plasterboard, a timber stud and a water pipe visible inside, and the offcut leaning below
BeforeAfter

Plumber's access cutout patched

The same hallway with new cornice run, the crack filled flush and everything repainted
Hallway with a run of cornice taken down and a crack stepping down the wall
BeforeAfter

Cornice and wall crack made good

The same ceiling re-sheeted, set flat, cornice back up and repainted
Ceiling stained and sagging after a roof leak with a section cut out to the joists
BeforeAfter

Water-damaged ceiling replaced

Why owners and managers keep my number

It comes down to one thing. You make one call, and I handle the rest. Here’s how it runs.

  1. 1

    You tell me the job

    Phone, a text with a photo, or a work order straight from your strata software. I get back to you the same business day.

  2. 2

    I quote it on site, fixed price

    You see what it costs before anything starts. Where the job needs a licensed tradesperson, their licence number goes on your quote.

  3. 3

    The right tradesperson does it

    I manage the job on site, photograph it, and send you one itemised invoice in your format. You never deal with the tradie, and you never chase anyone.

Body corporates and property managers keep me on their books because it’s one number, one accountable contact, one itemised invoice. You’re not briefing a different crew every visit, and you’re not reconciling four bills for one job.

Questions I get asked about plasterboard & wall repairs

Why does a patch show through later when it looked fine on the day?
Because the set coat has to dry all the way before it's painted. Paint it while it's still going off and the patch shrinks back a fraction as it cures, and that flat spot jumps out the first time low sun hits the wall. I let it dry properly between coats, which is why it takes a few visits and not one.
Why does the same crack keep coming back?
A crack that returns at the same cornice or corner is usually the building moving, not a bad fill. Re-setting it just hides it until it opens again. I'll tell you on the quote whether yours is a straight re-set or movement worth sorting first, so you're not paying me to patch the same line twice.
How long until I can paint it?
Two or three short visits over about a week. It's not the work that's slow, it's the drying. The set coat has to cure fully before it's paint-ready, and rushing that is exactly what gives you a patch you can see later.
Will you do just one small hole?
Happily. One doorknob hole or a single dent is a real job to me, not too small to bother with. Same fixed price either way, right up to re-sheeting a whole wall or ceiling.
What does it cost?
The quote's free and fixed before I start. It comes down to the size of the repair, a small hole versus a full sheet, whether it's a wall or a ceiling and how high, and the board the spot needs. If a crack turns out to be movement, I'll tell you that's a different job before you spend money on a patch.

Got a plasterboard & wall repairs job in mind?

Send me a photo of the damage and a few words, and I'll tell you what it takes to make it disappear. Most of the Gold Coast, Kingscliff to Coomera.

Free, fixed-price, no obligation.

Different job while we’re there? I also handle kitchen renovations, bathrooms & tiling and painting & decorating.

Call PaulGet a quote